Eyeshadow Techniques That Work
From a single wash of colour to a blended crease, the basic methods that make eyeshadow look intentional.
Eyeshadow looks simple until you try to make it. A colour that looked beautiful in the pan can apply patchily, disappear into the crease or refuse to blend with the shade beside it. The techniques that make eyeshadow work are not complicated, but they are specific, and they are easier to learn one at a time.
The most useful thing to understand is that most eyeshadow problems are blending problems. A product that seems chalky or uneven is often being applied to skin that has not been prepared, or blended with a brush that is too small.
Preparing the eyelid
The eyelid is different from the rest of the face. It is thin, it moves constantly and it produces oil. Eyeshadow applied directly to a bare lid will gather in the crease within a few hours. An eyeshadow primer, or a small amount of concealer set with powder, gives the product something to hold on to.
Primer also evens out the colour of the lid, which matters when using a light shade. A pale shadow over a reddish lid will look different from the same shadow over a neutral one. A thin layer of primer, allowed to dry, makes the colour more predictable.
A light dusting of translucent powder over the primer helps the shadow blend, particularly with powder products. Cream shadows behave differently and are usually applied over primer without powder.
The basic tools
A few brushes are enough for most looks. A flat shader brush picks up product and packs it onto the lid, giving strong colour. A fluffy blending brush has soft bristles that move product around and soften edges. A small, firm brush is useful for the crease and for detail work near the lash line.
A blending brush should be clean and dry. A brush that is damp will remove product rather than move it, and a brush loaded with several colours will muddy the look. Having two blending brushes, one for each colour, is a small luxury that makes a difference.
Fingers are useful for shimmer shades, which often apply better with warmth. A fingertip can press a shimmer onto the lid without the fallout that a brush can cause.
The one-colour wash
The simplest technique is a single colour applied over the whole lid. This is a good place to start because it teaches placement without the complication of blending several shades. A neutral or muted colour is easiest for a first attempt.
The product is picked up with a flat brush, tapped to remove excess and applied across the lid from the lash line to the crease. It is then softened at the edges with a clean blending brush. The result should be an even wash of colour with no hard line at the top.
A wash of colour can be worn alone, and it is often all that is needed for daytime. Adding a slightly darker shade in the crease gives the eye more depth without much extra work.
Building a crease
The crease is the fold above the eye, and shading it creates the impression of depth. A matte shade slightly darker than the lid colour is applied to the crease with a small, fluffy brush. The brush should follow the natural hollow of the eye rather than drawing a straight line.
The key is to start with less product and to blend as you go. A soft, diffuse crease looks natural; a sharp stripe does not. The brush should move in small circular or windscreen-wiper motions, gradually softening the edge of the colour.
A common mistake is to place the crease too high. The shadow should sit in the hollow just above the lash line, not halfway to the brow. Raising it too far makes the eye look tired or surprised.
Combining shades
A complete eye look usually uses three shades: a light colour on the lid, a medium colour in the crease and a darker colour at the outer corner. The shades should be close enough in tone to blend into one another, since a large jump in depth creates a hard line.
The order matters. The lid colour goes on first, followed by the crease shade, with the darkest colour at the outer corner last. Each shade is blended before the next is applied, and a clean brush is used for the final blending.
The outer corner is kept darkest and the inner corner lightest, which gives the eye a sense of shape. A touch of shimmer at the inner corner can open the eye, though it is a finishing detail rather than a necessity.
Shimmer and matte
Matte and shimmer shadows behave differently. Matte shades are easier to blend and are useful for the crease, where a smooth transition matters. Shimmer shades reflect light and are best on the centre of the lid or at the inner corner.
Applying a shimmer over a matte base gives it something to stick to and makes the colour stronger. Many people use a cream base in a matching tone for this purpose. A shimmer applied over a bare lid with a dry brush often looks patchy.
Shimmer falls out more than matte, particularly with a brush. Pressing it on with a fingertip, or using a damp brush, reduces the mess. A small amount of powder under the eye catches any fallout and can be swept away at the end.
Common mistakes
Using too much product is the most common problem. It is easy to add more shadow; it is hard to remove an overload without disturbing the rest of the look. Tapping the brush to remove excess before applying is a habit worth forming.
Blending with the wrong brush is the second. A small, firm brush is for placing colour, not for softening it. Trying to blend with a detail brush leaves harsh edges, while a fluffy brush does the job with little effort.
Poor lighting is a quiet contributor. A mirror with even, natural light shows what the eye look really looks like. A dim bathroom mirror can hide uneven blending that is obvious outside.
Making it last
Powder eyeshadow lasts reasonably well over primer, but it can fade during a long day. Setting the look with a light dusting of translucent powder, or with a setting spray, helps. Cream shadows need powder on top to stay in place.
Oily lids need more help than dry ones. A good primer is the main defence, and a mattifying powder over the lid before the shadow can help. Without preparation, even a long-wearing shadow will gather in the crease.
Adapting to the eye shape
The placement of eyeshadow matters as much as the colour. A person with hooded eyes, where the fold sits low over the lid, needs to place the crease shade slightly above the natural fold so that it remains visible when the eye is open. Looking straight into a mirror while applying helps, since closing the eye hides the area that will actually be seen.
For deep-set eyes, lighter shades on the lid bring the area forward, and a dark crease can make the eye look deeper still. For prominent eyes, darker shades on the lid and a softer crease can reduce the effect of projection. These are adjustments of placement rather than completely different techniques.
The distance between the eyes can also be changed. Shading the inner corners slightly brings them closer together, while keeping the inner corner light and shading the outer corner makes them appear farther apart. Small adjustments to a familiar routine are usually enough.
The bottom line
Eyeshadow technique comes down to preparation, placement and blending. Start with a primed lid, use a light hand, build the colour in layers and blend each layer with a clean, fluffy brush. A simple one-colour wash is a complete look, and an added crease shade gives depth. Once those basics are reliable, more elaborate looks are mostly a matter of practice.
Tools beyond brushes
A brush is not the only way to apply eyeshadow. A fingertip warms a shimmer and presses it onto the lid, often giving more intensity and less fallout than a brush. A small piece of sponge can apply a cream shadow and blend the edge at the same time. A cotton bud can place a highlight at the inner corner with precision.
Having options is useful, since different products behave differently. A powder that refuses to show up with a dry brush may apply beautifully with a slightly damp one, and a cream that streaks with a brush may blend smoothly with a ring finger. Experimenting on the back of the hand costs nothing and often solves a problem that seems to be about the product.